HP ProOne 600 Maintenance & Service Guide HP ProOne 600 G1 All-in-One - Page 77
WLAN module, Disconnect the antenna cables from the module
View all HP ProOne 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
WLAN module Description HP WLAN 802.11 a/g/n, 2x2 HP WLAN 802.11 a/b/g/n, 2x2 Spare part number 701398-001 695915-001 The WLAN module is located on the left side of the system board. The module is secured with one Phillips screw and has two connected antennas. NOTE: The procedure to replace the WLAN module must be performed by an HP technician. NOTE: WLAN module appearance may vary. To remove the WLAN module: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 33). 2. Remove the access panel (see Access panel on page 37). 3. Remove the stand (see Stand on page 39). 4. Remove the lower panel (see Lower panel on page 42). 5. Remove the VESA mounting adapter (see VESA mounting adapter on page 43). 6. Disconnect the antenna cables from the module (1). WLAN module 67