HP ScanJet 7800 Setup and Support Guide - Page 27

(continued) Name Description Relative humidity Operating the scanner: 15 percent to 80 percent noncondensing 10° to 35° C (50° to 95° F) Storage: up to 90 percent at 0° to 60° C or (32° to 140° F) Regulatory information Regulatory Model Identification Number: For regulatory identification purposes your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is FCLSD-0601. This regulatory number should not be confused with the marketing name (HP Scanjet 7800) or product numbers (L1960A, L1965A, L1966A, L1967A). Additional regulatory information about your scanner can be found on the regulatory_supplement.htm file on the HP Smart Document Scan Software CD. Note The regulatory label (with the part numbers and serial numbers) is on the bottom of the scanner. However, when you insert the output paper tray on the bottom of the scanner, you will cover up the regulatory label. Recycle and restricted material information ● Recycling ● Product restricted material Recycling Recycling, energy consumption, and environmental information is located on the HP Smart Document Scan Software CD that comes with the scanner. On the CD, browse for the file named recycle_supplement.pdf. Product restricted material This HP product contains the following material that might require special handling at end-of-life: Mercury in the scanner fluorescent lamp and transparent materials adapter (< 5 mg). For recycling information, contact www.hp.com/go/recycle, your local authorities, or the Electronic Industries Alliance at www.eiae.org. Disposal of Waste Equipment by Users in Private Households in the European Union Setup and Support Guide 25