HP Split 13-m001xx HP Split 13 x2 PC Maintenance and Service Guide - Page 42
Base enclosure, Remove the two upper rubber feet
View all HP Split 13-m001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Base enclosure Description Base enclosure Spare part number 732270-001 Before disassembling the keyboard dock, follow these steps: 1. Shut down the keyboard dock. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 32). Remove the base enclosure: 1. Remove the two upper rubber feet (2), and then the two Phillips PM2.5×6.0 screws (3) underneath. 2. Separate and release the base enclosure (4) from the dock. Reverse this procedure to install the base enclosure. Dock components 33