HP Split 13-m001xx HP Split 13 x2 PC Maintenance and Service Guide - Page 72
Home LED board, To remove the home LED board
View all HP Split 13-m001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Home LED board Description Home LED board Spare part number 737898-001 Before removing the home LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 32). 5. Remove the display rear cover (see Display rear cover on page 45). 6. Disconnect the battery cable (see Battery cable on page 46). 7. Remove the bottom trim (see Bottom trim on page 61). To remove the home LED board: 1. Disconnect the cable from the connector on the board (1). 2. Lift up to disengage the adhesive that secures the board from the tablet (2) and remove the board. Reverse this procedure to install the home LED board. Tablet components 63