HP Split 13-m001xx HP Split 13 x2 PC Maintenance and Service Guide - Page 73
Audio board, Disconnect the audio cable from the side of the audio board
View all HP Split 13-m001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Audio board Description Audio board (includes audio cable and HDMI/dock cable) Spare part number 732284-001 Before removing the audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 32). 5. Remove the display rear cover (see Display rear cover on page 45). 6. Disconnect the battery cable (see Battery cable on page 46). 7. Remove the bottom trim (see Bottom trim on page 61). To remove the audio board: 1. Disconnect the audio cable from the side of the audio board (1). 2. Disconnect the display cable from the audio board (2). 3. Disconnect the docking cable from the audio board (3). 4. Remove the three Phillips PM2.0×3.0 screws (4) that secure the audio board to the tablet. 5. Lift the audio board from the tablet (5). 64 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts