HP StorageWorks 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 107
BL System Messages, BL-1000
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
BL System Messages Chapter 5 BL-1000 Message , [BL-1000], ,, INFO, , Initializing ports... Probable Cause Indicates that the switch has started initializing the ports. Recommended No action is required. Action Severity INFO BL-1001 Message , [BL-1001], ,, INFO, , Port initialization completed. Probable Cause Indicates that the switch has completed initializing the ports. Recommended No action is required. Action Severity INFO BL-1002 Message , [BL-1002], , FFDC, CRITICAL, , Init Failed: slot DISABLED because internal ports were not ONLINE, . Probable Cause Indicates that the blade initiation failed because one or more of the internal ports were not online. The blade is faulted. Recommended Action Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Note that any reference seen to slot 0 is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 contain FR4-18i and FA4-18 blades respectively. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on these command. Fabric OS Message Reference 49 53-1001157-01