HP StorageWorks 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 127
BM-1056, Message, Probable Cause, Recommended, Action, Severity, firmwareDownload
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
BM-1056 7 BM-1056 Message , [BM-1056], ,, INFO, , AP is not configured. Persistently disabling all ports on the switch. Probable Cause Indicates the policy of the specified switch is to persistently disable all ports the first time the AP is detected. This may be caused by one of the following: • The AP was detected for the first time on this switch. • The switch was configured under a different mode. Recommended Configure the switch to persistently enable all ports. Action Severity INFO BM-1058 Message , [BM-1058], ,, WARNING, , Download of AP firmware failed for the switch. Reissue firmwaredownload to recover. Probable Cause Indicates the automatic firmware upgrade on the application processor (AP) has failed, because the firmware version running on the AP was detected to be different from the system firmware because of a firmware upgrade. Recommended Issue the firmwareDownload command to recover the AP. Action Severity WARNING Fabric OS Message Reference 69 53-1001157-01