HP StorageWorks 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 474
SEC-1037, Indicates the port member is invalid for one of the following reasons
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 474 highlights
75 SEC-1037 SEC-1037 Message , [SEC-1037], ,, ERROR, , Invalid WWN format . Probable Cause Indicates the world wide name (WWN) entered in the policy member list had an invalid format. Recommended Run the command again using the standard WWN format, 16 hexadecimal digits grouped as eight Action colon separated pairs. For example: 50:06:04:81:D6:F3:45:42. Severity ERROR SEC-1038 Message , [SEC-1038], ,, ERROR, , Invalid domain . Probable Cause Indicates an invalid domain ID was entered. Recommended Verify that the domain ID is correct. If it is not, then re-run the command using the correct domain Action ID. Severity ERROR SEC-1040 Message , [SEC-1040], ,, ERROR, , Invalid portlist (). Cannot combine * with port member in the same portlist. Probable Cause Indicates the port list contains the wildcard asterisk (*) character. You cannot use the asterisk in a port list. Recommended Enter the port list values without any wildcards. Action Severity ERROR SEC-1041 Message , [SEC-1041], ,, ERROR, , Invalid port member in portlist (). . Probable Cause Indicates the port member is invalid for one of the following reasons: • The value is not a number. • The value is too long. Valid numbers must be between one and three characters long. • The value cannot be parsed due to invalid characters. Recommended Use valid syntax when entering port members. Action 416 Fabric OS Message Reference 53-1001157-01