HP StorageWorks 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 591
ZONE-1018, Probable Cause, Recommended, Action, Severity, Message, supportFtp, supportSave
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 591 highlights
92 ZONE-1018 Probable Cause Indicates the fabric assist (FA) zoning configuration has more than one initiator. The probable cause is incorrect entries in the FA zoning configuration. Recommended Edit the zone database to ensure that only one initiator is set for each FA zone configuration. Action Severity ERROR ZONE-1018 Message , [ZONE-1018], ,, ERROR, , Incorrect zoning enforcement type() at port(). Probable Cause Indicates an incorrect zoning enforcement type was reported on the specified port. This is a software error. A QuickLoop zone type (value = 4) or an uninitialized type (value = 0) are invalid. The valid zone type values are: • hard port zone (value = 1) • hard wwn zone (value = 2) • session based hard zoning (value = 3) • FA zone (value = 5) QuickLoop zones are not supported in Fabric OS v4.x and above. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR ZONE-1019 Message , [ZONE-1019], ,, ERROR, , Transaction Commit failed. Reason code () - \"\" Probable Cause Indicates the reliable commit service (RCS) had a transmit error. RCS is a protocol used to transmit changes to the configuration database within a fabric. Recommended Action Often this message indicates a transitory problem. Wait a few minutes and retry the command. Make sure your changes to the zone database are not overwriting the work of another admin. Run the cfgTransShow command to find out if there is any outstanding transaction running on the local switches. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR Fabric OS Message Reference 533 53-1001157-01