HP StorageWorks 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 262
Ficn-1083, Ficn-1084, Ficn-1085, Ficn-1086
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
28 FICN-1083 FICN-1083 Message , [FICN-1083], ,, WARNING, , EmulEls:SW_RSCN received on GEPort= VEPort= Domain=0x Port=0x. Probable Cause Indicates an attached port with the established FICON emulated path has logged out from the switch. Recommended This may be an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING FICN-1084 Message , [FICN-1084], ,, ERROR, , fcFicInit: No DRAM2 memory available, FICON emulation is disabled. Probable Cause Indicates a faulty DRAM2 was detected and access to its address range is prohibited. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1085 Message , [FICN-1085], ,, INFO, , FICON FCIP Tunnel is Up on GE,tunnel Id=. Probable Cause Indicates a FICON FCIP tunnel has been established successfully to the peer switch. Recommended No action is required. Action Severity INFO FICN-1086 Message , [FICN-1086], ,, ERROR, , FICON FCIP Tunnel is Down on GE,tunnel Id=. Probable Cause Indicates a FICON FCIP tunnel to the peer switch has been terminated. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR 204 Fabric OS Message Reference 53-1001157-01