HP StorageWorks 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 397
ISNS-1009, Recommended, Action, Severity, Message, Probable Cause, fosConfig
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 397 highlights
48 ISNS-1009 Recommended No action is required. You may change the configuration and retry the peering with the external Action iSNS server. Severity INFO ISNS-1009 Message , [ISNS-1009], ,, INFO, , Peering with external iSNS server not started because no virtual targets found. Probable Cause Indicates that no virtual targets were found, so peering was not started. Recommended No action is required. Peering will resume automatically when virtual targets are detected. Action Severity INFO ISNS-1010 Message , [ISNS-1010], ,, WARNING, , Slot/port /ge is out of range. Probable Cause Indicates the slot or port is out of range. Recommended Retry with a valid slot/port. Refer to the appropriate hardware reference manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message , [ISNS-1011], ,, INFO, , iSNS Client Service is . Probable Cause Indicates the current state of the internet storage name services (iSNS) client is enabled or disabled. Recommended No action is required. Use the fosConfig command to display, enable, or disable the iSNS client Action service. Severity INFO ISNS-1013 Message , [ISNS-1013], ,, WARNING, , iSNS server connection failure. Fabric OS Message Reference 339 53-1001157-01