HP StorageWorks 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 91
AUTH System Messages, AUTH-1001
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
AUTH System Messages Chapter 3 AUTH-1001 Message , [AUTH-1001], ,, INFO, , has been successfully completed. Probable Cause Indicates that the secret database operation has been updated using the secAuthSecret command. The values for Operation type can be "set" or "remove". Recommended No action is required. Action Severity INFO AUTH-1002 Message , [AUTH-1002], ,, ERROR, , has failed. Probable Cause Indicates that the specified action has failed to update the secret database using the secAuthSecret command. The values for Operation type can be "set" or "remove". Recommended Action Retry the secAuthSecret command. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, INFO, , type has been successfully set to . Probable Cause Indicates that an authentication configuration value was set to the specified value. The data type is either "authentication type", "DH group type", or "policy type". Recommended No action is required. Action Severity INFO Fabric OS Message Reference 33 53-1001157-01