HP StorageWorks 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001 - Page 499
SEC-1156, Probable Cause, Recommended, Action, Severity, Message, supportFtp, supportSave
View all HP StorageWorks 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 499 highlights
75 SEC-1156 Probable Cause Indicates that either the defined or active policy was too large after modifying the index/area ID. The status values can be either defined, active, or both. A negative value means that a policy set was failed by the daemon. Recommended Reduce the size of the specified policy database. Action Severity INFO SEC-1156 Message , [SEC-1156], ,, INFO, , Change failed: . Probable Cause Indicates the security daemon is busy. The status values can be defined, active, or both. A negative value means that a policy set was failed by the daemon. Recommended Action For the first reject, wait a few minutes and then resubmit the transaction. Fabric-wide commands might take a few minutes to propagate throughout the fabric. Make sure to wait a few minutes between executing commands so that your commands do not overlap in the fabric. Severity INFO SEC-1157 Message , [SEC-1157], ,, INFO, , PID Change failed: . Probable Cause Indicates the provisioning resources for a security policy failed due to low memory or internal error. The status values can be either defined, active, or both. A negative value means that a policy set was failed by the daemon. Recommended Action Retry the failed command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO SEC-1158 Message , [SEC-1158], ,, INFO, , Invalid name . Probable Cause Indicates the specified name is invalid. The name can be a policy name or a switch name. Recommended Enter a valid name. Action Severity INFO Fabric OS Message Reference 441 53-1001157-01