HP VL400 hp vectra vl400 (automatic), Image Library administrator's version CD - Page 55
Performing Remote Installations, CD to the deployment server described in previous
View all HP VL400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4 Copying Drivers and Utilities to a Server Performing Remote Installations Performing Remote Installations To perform a remote installation using the automatic packages, you need a software deployment tool and correctly configured deployment server. Also, the target client PCs must already be connected to the LAN. The procedure to use depends on the deployment software used. Refer to your deployment software documentation for precise instructions. As a rough guideline, the procedure is as follows: 1 Copy the selected software component files from the Image Library CD to the deployment server (described in previous section). 2 Using your deployment tool, run the executable software component files on the client PCs. The software components will be installed remotely. 3 When you have finished installing all the required components, reboot the client PCs remotely using your deployment tool. 55