HP Visualize c3000 hp Visualize b1000 and c3000 workstations owner's guide (a5 - Page 108
Removing the I/O Card Retainer, Removing the I/O Card
View all HP Visualize c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Figure 5-7 Changing Your Computer Hardware Configuration I/O Cards 3. Pull evenly in the direction of the arrow on both PULL tabs of the I/O card retainer to remove it. See Figure 5-7. Removing the I/O Card Retainer I/O Card Figure 5-8 I/O Card Retainer Air Divider 4. Locate the I/O card you want to remove and using a T-15 Torx driver remove the I/O card's bulkhead screw as shown in Figure 5-8. Removing the I/O Card I/O Card Bulkhead Screw I/O Card Bulkhead I/O Card Being Removed 5. Pull evenly on the outside edges of the I/O card to remove it. See Figure 5-8. 108 Chapter 5
108
Chapter 5
Changing Your Computer Hardware Configuration
I/O Cards
3.
Pull evenly in the direction of the arrow on both PULL tabs of the I/O
card retainer to remove it. See Figure 5-7.
Figure 5-7
Removing the I/O Card Retainer
4.
Locate the I/O card you want to remove and using a T-15 Torx driver
remove the I/O card’s bulkhead screw as shown in Figure 5-8.
Figure 5-8
Removing the I/O Card
5.
Pull evenly on the outside edges of the I/O card to remove it. See
Figure 5-8.
I/O Card Retainer
I/O Card
Air Divider
I/O Card
Bulkhead
Screw
I/O Card
Bulkhead
I/O Card Being Removed