HP Visualize c3000 hp Visualize b1000 and c3000 workstations owner's guide (a5 - Page 61
Verifying the CD Drive Operation
View all HP Visualize c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Using Your CD Drive Verifying the CD Drive Operation Verifying the CD Drive Operation To verify that your workstation can communicate with the CD drive, follow the steps covered in this section. Note that to perform the steps required in this section, you must be superuser (root). If you cannot log in as root contact your system administrator. 1. Log in as root. 2. Type the following command at the shell prompt and press Enter: /usr/sbin/ioscan -d sdisk After a few seconds the ioscan utility lists all of the I/O devices that use the "sdisk" driver. Your CD drive should be among the devices listed. The list appears similar to the following: H/W Path Class Description 10/0/15/1.5.0 disk SEAGATE ST39102LC 10/0/15/1.6.0 disk SEAGATE ST39102LC 10/0/14/0.0.0 disk TEAC CD-532E-B If ioscan does not detect any usable I/O system devices, such as the CD drive, nothing is output and you are returned to the system prompt. Since this indicates possibly that the driver for the CD drive is not configured, read the section "Configuring the CD Driver" in this chapter. Chapter 2 61