HP Visualize c3000 hp Visualize b1000 and c3000 workstations owner's guide (a5 - Page 116
Removing the CD Drive Bracket and Blank
View all HP Visualize c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Changing Your Computer Hardware Configuration Removable Media Devices Figure 5-13 4. Remove both CD drive bracket screws (T-15 Torx/slotted screws) and pull the CD drive bracket out of the chassis assembly as shown in Figure 5-13. Next remove the four CD drive blank filler screws (T-10 Torx/slotted screws) as shown in Figure 5-13 and remove the blank filler from the bracket. You are now ready to mount the CD drive into the CD drive bracket. Note you will need the blank filler screws to mount the CD drive. Removing the CD Drive Bracket and Blank CD drive Bracket Blank CAUTION Blank Filler Screws (T-10 Torx Screws) Bracket Screws CD drives are susceptible to mechanical and electronic shock. When handling the drive, always wear the static-grounding wrist strap that came in the CD drive kit. Always handle the drive carefully. 116 Chapter 5