HP Visualize c3000 hp Visualize b1000 and c3000 workstations owner's guide (a5 - Page 155
Memory Card Slot Numbers and Loading Sequence
![]() |
View all HP Visualize c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Changing Your Computer Hardware Configuration Memory Cards Figure 5-45 3. Position the memory slots so they face you as shown in Figure 5-45. Note that Figure 5-45 also provides the loading sequence for the DIMM cards. This loading sequence must be maintained when you install the DIMM cards, but the size of the DIMM card put in each slot can vary. For example, you can install a 128Mbyte card before a 256Mbyte card and then follow the installation of the 256Mbyte card with another 128Mbyte card. The B1000 and C3000 computers use only 128 Mbyte and 256 Mbyte DIMM cards. 4. Remove the hard disk drive fan as explained in the section "Removing the Fan from the Hard Disk Drive Area" in this chapter, and load the DIMM cards in the slots using the loading sequence provided in Figure 5-45. Memory Card Slot Numbers and Loading Sequence Hard Disk Drive Fan NOTE When installing memory, you need to orient the notches on the bottom edge of the DIMM card so that they are aligned with the keys on the DIMM connector. See Figure 5-46. The keyed DIMM connectors prevent you from installing the DIMM cards backwards. Chapter 5 155
![](/manual_guide/products/hewlettpackard-visualize-b1000-hp-visualize-b1000-c3000-workstations-owners-guide-a599290000-b0051bf/155.png)