HP Workstation x1000 hp workstation x1000 - technical reference guide - Page 179

Removing the System Fan Rivets, Removing the System Fan

Page 179 highlights

removing and replacing hardware parts removing and replacing a system fan Figure 6-43 4. Remove the rivets from the back of the chassis. See Figure 6-43. To do this, you must pry up on the rivets with a screwdriver and remove them from their collets. Next, push the rivets' collets toward the inside of the system while holding on to the system fan. Removing the System Fan Rivets Lift up on the four rivets with a screwdriver. Push the rivet's four collets toward the inside of the workstation. Figure 6-44 5. Remove the system fan from the workstation. See Figure 6-44. Removing the System Fan System Fan 6. Secure all cables neatly within the workstation and replace its cover. Refer to page 144. Chapter 6 179

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212

removing and replacing hardware parts
removing and replacing a system fan
Chapter 6
179
4. Remove the rivets from the back of the chassis. See Figure 6-43. To do
this, you must pry up on the rivets with a screwdriver and remove
them from their collets. Next, push the rivets’ collets toward the
inside of the system while holding on to the system fan.
Figure 6-43
Removing the System Fan Rivets
5.
Remove the system fan from the workstation. See Figure 6-44.
Figure 6-44
Removing the System Fan
6. Secure all cables neatly within the workstation and replace its cover.
Refer to page 144.
Lift up on the four rivets with a
screwdriver.
Push the rivet’s four collets toward
the inside of the workstation.
System Fan