HP d640 HP D640 High-Volume Printer - PostScript Emulation Manual, C5630-90002 - Page 10
Metal bracket, Replace the top cover and tighten the three captive screws
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Press down firmly on the card to make sure the connector is firmly in the socket. Step 9 Replace the memory access cover. Make sure you slide the cover under the metal bracket on each side of the cover. Figure 6 Metal bracket Step 10 Replace the top cover and tighten the three captive screws that hold the cover in place. Step 11 Close the ejection unit cover and the upper right cover. 6 Chapter 1: Introduction
6
Chapter 1: Introduction
Press down firmly on the card to make sure the connector is firmly in
the socket.
Step 9
Replace the memory access cover.
Make sure you slide the cover under the metal bracket on each side
of the cover.
Figure 6
Metal bracket
Step 10
Replace the top cover and tighten the three captive screws
that hold the cover in place.
Step 11
Close the ejection unit cover and the upper right cover.