HP rp3440 Internal Cabling Guide for HP Smart Array Controllers - Page 30

Recabling for RAID,

Get HP rp3440 PDF manuals and user guides View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Cabling for the HP Integrity rx5670 Server Recabling for RAID Recabling for RAID From the factory, the internal hot plug drives for the HP rx5670 server are connected to the integrated SCSI as follows (see Figure 3-6 and Figure 3-7): • The MP/SCSI board in PCI slot 1 has a SCSI connector cabled to physical drives A and B • The LAN/SCSI board in PCI slot 3 has a SCSI connector cabled to physical drives C and D Figure 3-6 Default Cabling for Internal SCSI Hot Plug Drives Figure 3-7 Physical Drive Location (front of server with bezel removed) CD AB To use RAID with your hot plug drives, you need to disconnect the internal SCSI cables from their embedded controller and reconnect them to the HP Smart Array 5302 or 5304 controller card using the supplied A9828-63001 and A9828-63002 cables, as described below. 26 Chapter 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Cabling for the HP Integrity rx5670 Server
Recabling for RAID
Chapter 3
26
Recabling for RAID
From the factory, the internal hot plug drives for the HP rx5670 server are connected to the integrated SCSI
as follows (see Figure 3-6 and Figure 3-7):
•
The MP/SCSI board in PCI slot 1 has a SCSI connector cabled to physical drives
A and B
•
The LAN/SCSI board in PCI slot 3 has a SCSI connector cabled to physical drives
C and D
Figure 3-6
Default Cabling for Internal SCSI Hot Plug Drives
Figure 3-7
Physical Drive Location (front of server with bezel removed)
To use RAID with your hot plug drives, you need to disconnect the internal SCSI cables from their embedded
controller and reconnect them to the HP Smart Array 5302 or 5304 controller card using the supplied
A9828-63001 and A9828-63002 cables, as described below.
D
C
B
A