HP rp3440 Internal Cabling Guide for HP Smart Array Controllers - Page 6

Installing the HP Smart Array 5302 or 5304 Controller Card, - pci slot

Get HP rp3440 PDF manuals and user guides View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Cabling for the HP Integrity rx8620 Server Installing the HP Smart Array 5302 or 5304 Controller Card Figure 1-2 Smart Array 5304 Controller Card Installing the HP Smart Array 5302 or 5304 Controller Card Step 1. If the server is running, shut down the OS, power off the server, and unplug the power cord. Step 2. Remove the top cover of the server. Step 3. The HP Smart Array 5302 or 5304 controller card must be installed in PCI slot 8 for internal RAID. If another PCI card is located in slot 8, remove that card and relocate it to another slot. Do this by twisting the blue paddle that locks the card in place by the bulkhead (see Figure 1-3). Once the card is unlatched, pull the tabs on the insulator/dividers to unseat the card. Then insert the 5302 or 5304 controller card into the empty slot. Figure 1-3 PCI Card Paddle Locks 2 Chapter 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Cabling for the HP Integrity rx8620 Server
Installing the HP Smart Array 5302 or 5304 Controller Card
Chapter 1
2
Figure 1-2
Smart Array 5304 Controller Card
Installing the HP Smart Array 5302 or 5304 Controller Card
Step 1.
If the server is running, shut down the OS, power off the server, and unplug the power cord.
Step 2.
Remove the top cover of the server.
Step 3.
The HP Smart Array 5302 or 5304 controller card must be installed in PCI slot 8 for internal RAID.
If another PCI card is located in slot 8, remove that card and relocate it to another slot. Do this by
twisting the blue paddle that locks the card in place by the bulkhead (see Figure 1-3). Once the card
is unlatched, pull the tabs on the insulator/dividers to unseat the card. Then insert the 5302 or
5304 controller card into the empty slot.
Figure 1-3 PCI Card Paddle Locks