HP rp3440 Internal Cabling Guide for HP Smart Array Controllers - Page 58

Cable Routing on Smart Array Card and PCI Cage - heatsink

Get HP rp3440 PDF manuals and user guides View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Cabling for the HP Integrity rx1620 Server Installing the HP Smart Array 6402 Controller Card Figure 6-3 Cable Routing on Smart Array Card and PCI Cage Exit parallel to connector Under slot 2 connector Around heatsink Channel A1 Step 8. Attach the SCSI Channel A connector (previously removed from the system board connector) to the A1 Channel of the controller card. Step 9. Route the SCSI cable around the heatsink on the controller card and under the edge of the PCI slot 2 connector. See Figure 6-3. Step 10. Continue routing the cable parallel to the connector edge of the PCI cage. Step 11. Reinstall any accessory cards previously removed from PCI slot 2. Step 12. Install the PCI cage into the server chassis. Step 13. Route the SCSI cable under the power supply bracket. See Figure 6-4. Figure 6-4 Cable Routing Under Power Supply Bracket Power Supply Bracket Step 14. Route the SCSI cable through the access slot of the fan assembly to the connector on the SCSI backplane. See Figure 6-5. 54 Chapter 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Cabling for the HP Integrity rx1620 Server
Installing the HP Smart Array 6402 Controller Card
Chapter 6
54
Figure 6-3 Cable Routing on Smart Array Card and PCI Cage
Step 8.
Attach the SCSI Channel A connector (previously removed from the system board connector) to the
A1 Channel of the controller card.
Step 9.
Route the SCSI cable around the heatsink on the controller card and under the edge of the PCI slot
2 connector. See Figure 6-3.
Step 10.
Continue routing the cable parallel to the connector edge of the PCI cage.
Step 11.
Reinstall any accessory cards previously removed from PCI slot 2.
Step 12.
Install the PCI cage into the server chassis.
Step 13.
Route the SCSI cable under the power supply bracket. See Figure 6-4.
Figure 6-4 Cable Routing Under Power Supply Bracket
Step 14.
Route the SCSI cable through the access slot of the fan assembly to the connector on the SCSI
backplane. See Figure 6-5.
Around heatsink
Exit parallel to
connector
Channel A1
Under slot 2 connector
Power Supply
Bracket