Hitachi DZ-BX35A Owners Guide - Page 136

English Message Cause & Troubleshooting Reference page Disc error has occurred. Disc error could have occurred during editing of scenes. Keep disc inside & restart. Turn off the DVD video camera/recorder with the disc being used in it, connect AC adapter/charger, and then power the DVD video 26 camera/recorder again. Repair of scenes will be tried. Disc error has occurred. This message will appear when disc error occurred during Unfinalizing is not unfinalization, and unfinalizing disc failed. Replace the disc. 103 complete. Disc error has occurred. • Use another disc. • See *3 and *4 on page 139. 10, 24 • Mismatch in recording information may be caused by editing done on some device other than this DVD video camera/ recorder. 99 Initialize the disc or use another disc. • Initializing the disc will erase all data on it. Disc full. Cannot execute. Delete unnecessary scenes before using this disc, or use another disc. 79 Disc has no data. This message will appear when an attempt is made to execute playback or editing on Disc Navigation with no scene recorded. - Disc has no PlayList. Switching of play list was selected with no play list stored. 93 Disc includes protected The disc may be software protected from a device other than this scenes. Delete scenes? DVD video camera/recorder. To release this case, use a device - that has executed software-protect. Disc is full. Cannot add control info. The number of entered scenes has reached the limit that can be entered, so the control information for generating thumbnails cannot be added. Combine several scenes or delete them. 79, 81 Disc is not formatted. • Has the disc been initialized on a PC? Format the disc now? Choose "YES" and initialize the disc when using it on this DVD video camera/recorder. Initialization will delete all data on the 99 disc. • See *2 on page 139. Disc must be finalized • This message will appear if you remove a DVD-RW (VF-mode)/ before it can be played back on DVD player or DVD-R that has not been finalized from the DVD video camera/ recorder. 108 DVD recorder. • See *5 on page 139. Drive overheat. Please The temperature inside the DVD video camera/recorder is too retry later. high, and reading or writing of the data on disc may not be performed normally. Turn the DVD video camera/recorder off and wait for a while. The 31 temperature will be effectively decreased if the DVD video camera/recorder is placed in a well-ventilated spot. DVD-R* Disc, 16:9 With DVD-RW (VF-mode)/DVD-R/+RW disc, the setting of 16:9 mode cannot be mode will not be possible when the Video mode is STD. changed, when Video * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode), 63 mode is STD. "+RW" will appear when using a +RW. DVD-R* Disc, Input Once a DVD-RW (VF-mode)/DVD-R disc has been recorded in Source cannot be the 16:9 mode, the input source will not be changeable. 63 changed. * "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode). 136