Hitachi DZ-BX35A Owners Guide - Page 138
This message may also appear when condensation occurs. In this case, do not repair the disc; turn
View all Hitachi DZ-BX35A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
English Message Cause & Troubleshooting Reference page Scenes over limit. Cannot add scenes. The number of scenes entered in play list has reached the limit that can be entered. Delete several scenes. 92, 96 Scenes over limit. Cannot divide scene. The number of entered scenes has reached the limit that can be entered. Delete several scenes. 92, 96 Stop processing The C button was pressed to stop processing of multiple scenes. - There was no scene which can be deleted. This message will appear if you try to delete multiple scenes on Disc Navigation when all the selected scenes have been locked. Release the lock on scenes before executing deletion. 79, 86 The disc is finalized. This message will appear if you press the FINALIZE button with a Finalize is not required. finalized DVD-RW/DVD-R/+RW loaded in this DVD video camera/ 102 recorder. Finalizing the disc is not necessary. This disc cannot be A disc that cannot be used on this DVD video camera/recorder used. Please replace has been loaded. Check the type of disc. 25 disc. This disc is recorded by This DVD video camera/recorder can use only discs recorded on the PAL system. Please the NTSC system. A disc recorded on the PAL system cannot be - replace disc. used on this DVD video camera/recorder. UNFORMAT DISC The disc is not initialized or it is damaged. If this message appears, be sure to initialize the disc on this DVD video camera/recorder before using it. Reinitializing even a disc used on this DVD video camera/ recorder may be necessary (initializing will erase all recorded 99 contents on disc). If this message appears, try to initialize the disc. If the same message still appears, the disc may be damaged: Use another disc. See *2 on page 139. 10 Use AC adapter/ charger. Finalization is not possible when the DVD video camera/recorder is powered by a battery: Use the AC adapter/charger for finalization. 26, 102 Use AC adapter/ charger. Turn off power. Scene cannot be repaired when the DVD video camera/recorder is powered by a battery. If the AC adapter/charger is unavailable in handy place, remove the disc, use the opposite side, or use another disc. To repair the 26 removed disc, insert the disc into the DVD video camera/recorder afterwards, and connect the AC adapter/charger. Write protected. Check card. A card with the erase prevention switch locked is inserted: Unlock the switch. 25 Write protected. Check disc. • A write-protected disc is inserted. • Release the write-protect using the Disc Navigation menu. 100 *1 • This message may also appear when dirt adheres to disc. If this message appears when a recorded disc is recognized immediately after it is inserted, do not repair the disc; remove it and then use the provided disc cleaning cloth to clean off the dirt before using it. • This message may also appear when condensation occurs. In this case, do not repair the disc; turn the DVD video camera/recorder off, wait until it dries out, and then turn it on again. 138