Hitachi DZ-BX35A Owners Guide - Page 146
Press the DISC NAVIGATION button.
View all Hitachi DZ-BX35A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
English Symptom Cause and Correction Operating sound is heard cyclically. This sound is heard because the disc is cyclically operated and does not indicate a fault. Some vibrations are felt These vibrations or sound are caused by disc drive: This does or slight sound is heard not indicate a fault. from mechanism. • No operation can be In the following cases, it will take more time than usual until performed because operation is possible: the ACCESS/PC or • Immediately after a disc or card is reinserted. CARD ACCESS • When a long time has elapsed since the DVD video camera/ indicator on this DVD recorder was turned off last. video camera/ • When the temperature is greatly different from the status of recorder remains lit or previous recording. blinking. • When disc with scratches, dirt or fingerprints is inserted. • After disc or card is • When disc is subject to severe vibrations. inserted, it takes • When the battery or DC power cord was disconnected instead some time until of following the correct procedure using power switch to turn recording is possible. the DVD video camera/recorder off. No image in viewfinder. Is LCD monitor open? No image will appear in viewfinder unless the LCD monitor is closed and securely locked to DVD video camera/recorder. No image appears on the LCD screen or in the viewfinder. • Is DVD video camera/recorder connected to PC using PC connection cable? Unplug the PC connection cable. • Does DVD video camera/recorder stop at the end of the scene to which wipe-out was set and played back? Press the DISC NAVIGATION button. • Is the DVD video camera/recorder set to the sleep/restart status? Reference page - - - - - 146