Hitachi NT65GS Instruction Manual - Page 25
Nail feeder B
UPC - 717709010864
View all Hitachi NT65GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
(3) Push the nail feeder (A) to engage the nail feeder (B) to the nail strip. English 3 Nail feeder (B) Nail feeder (A) NOTE: ⅷ Quietly push the nail feeder (A) and nail feeder (B) against the nail. If the nail feeder (A) and nail feeder (B) are released from backward the magazine and bumped against the nail, the connecting adhesive of the nail can be damaged. ⅷ Use nail strip of more than 10 nails. ⅷ Use an unbroken nail strip with nails of all the same length. The Nailer is now ready to operate. Removing the nails: 1 Pull the nail feeder (B) backward. 2 Return the nail feeder (B) forward quietly while pushing the nail feeder (A). 3 Pull out nails from the back of the magazine. Nails (1) Lightly press the stop lever and gently pull out the magazine cover. Press Pull out Magazine cover Stop lever (2) Set nail strip into the magazine and keep the points of nails in contact with Groove. 1 2 Nail feeder (A) Nail feeder (B) Nail strip Magazine Groove NOTE: ⅷ The nails shown in page 17 can be loaded onto the side guide groove of the magazine without any adjustment. Always keep the points of nails in contact with Groove. 25