Hitachi NT65GS Instruction Manual - Page 29

Using The Nose Cap, Clearing A Jam - nt65gb

Get Hitachi NT65GS - 2-1-2inch 16 Gauge Gas Powered Straight Finish Nailer PDF manuals and user guides
UPC - 717709010864
View all Hitachi NT65GS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

English Nose Cap Magazine NT65GS, NT65GA, NT65GB USING THE NOSE CAP WARNING ⅷ When attaching or detaching the nose cap, be sure to remove your finger from the trigger and remove the fuel cell and the battery from the nailer. If you like to protect the surface of workpiece against scratches or markings made by the push lever, attach the accessory nose cap to the push lever. 1 Remove the fuel cell and the battery from the nailer. 2 Put the nose cap to the toe of the push lever. 3 The nose cap is marked to indicate the exit point of the nail, making alignment easier. 4 When not using the nose cap, secure in the storage compartment located on the reverse side of the magazine. Nose Cap Push Lever Nose Cap Nose Cap Magazine NT50GS NOTE: ⅷ The nose cap may reduce nailing depth due to its thickness. Re-adjustment of nailing depth is required. CLEARING A JAM If nails are jammed in firing head, remove it, and adjust the nailing in the following order. 2 Push Lever CAUTION ⅷ Remove the fuel cell and the battery from the Nailer. 1 Remove the fuel cell and the battery from the Nailer. 2 Remove all nails. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
English
29
USING THE NOSE CAP
WARNING
²
When attaching or detaching the nose
cap, be sure to remove your finger
from the trigger and remove the fuel
cell and the battery from the nailer.
If you like to protect the surface of workpiece
against scratches or markings made by the
push lever, attach the accessory nose cap to
the push lever.
1
Remove the fuel cell and the battery from
the nailer.
2
Put the nose cap to the toe of the push
lever.
3
The nose cap is marked to indicate the
exit point of the nail, making alignment
easier.
4
When not using the nose cap, secure in
the storage compartment located on the
reverse side of the magazine.
NT65GS, NT65GA, NT65GB
NT50GS
NOTE:
²
The nose cap may reduce nailing depth
due to its thickness. Re-adjustment of
nailing depth is required.
CLEARING A JAM
If nails are jammed in firing head, remove it,
and adjust the nailing in the following order.
CAUTION
²
Remove the fuel cell and the battery
from the Nailer.
1
Remove the fuel cell and the battery from
the Nailer.
2
Remove all nails.
Nose Cap
Nose Cap
Magazine
Push Lever
Nose Cap
Magazine
Nose Cap
2
Push Lever