Hitachi NT65MA3 Instruction Manual - Page 7
Nail Selection, 5-4. Examples of Nail Use - finish nailer nails
UPC - 717709011281
View all Hitachi NT65MA3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5-3. Nail Selection The Model NT 65MA3 utilizes small-head, T-shaped nails (finish nails) collated by tapes. Applicable nails are shown below. CAUTION: Ensure that nails are as specified in Fig. 1. Other nails will cause clogging of nails and subsequent damage to the nailer. 15-gauge finish nail (collating angle 34û) Min. Max. 5-4. Examples of Nail Use A: Crown molding Fig. 1 Dimensions of nails B: Base molding Examples of uses for the nails shown in 5-2 for installing finish materials, or molding as shown in Fig. 2. Typical mounting methods are shown in circles A and B. Fig. 2 Examples of molding --- 4 ---
--- 4 ---
5-3. Nail Selection
The Model NT 65MA3 utilizes small-head, T-shaped nails (finish nails) collated by tapes.
Applicable nails are
shown below.
CAUTION: Ensure that nails are as specified in Fig. 1.
Other nails will cause clogging of nails and
subsequent damage to the nailer.
15-gauge finish nail (collating angle 34
ß
)
Min.
Max.
Fig. 1
Dimensions of nails
5-4. Examples of Nail Use
Examples of uses for the nails shown in 5-2 for
installing finish materials, or molding as shown in Fig. 2.
Typical mounting methods are shown in circles A and B.
A: Crown molding
B: Base molding
Fig. 2 Examples of molding