Hitachi NT65MA3 Instruction Manual - Page 9
COMPARISONS WITH SIMILAR PRODUCTS, mm x 305, mm x 76 mm, Easily changeable 360, by turning by hand
UPC - 717709011281
View all Hitachi NT65MA3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. COMPARISONS WITH SIMILAR PRODUCTS Maker Model name Operating pressure HITACHI NT 65MA3 NT 65MA2 4.9 to 8.3 bar (5 to 8.5 kgf/cm2 ) (70 to 120 psi) P 4.9 to 8.3 bar (5 to 8.5 kgf/cm2 ) (70 to 120 psi) Q 4.9 to 8.3 bar (5 to 8.5 kgf/cm2 ) (70 to 120 psi) R 4.9 to 8.3 bar (5 to 8.5 kgf/cm2 ) (70 to 120 psi) S 4.9 to 8.3 bar (5 to 8.5 kgf/cm2 ) (70 to 120 psi) Weight 1.9 kg (4.2 lbs.) 2.0 kg (4.4 lbs.) 2.0 kg (4.4 lbs.) 1.7 kg (3.7 lbs.) 2.1 kg (4.6 lbs.) 1.8 kg (4 lbs.) Dimensions (L x H x W) 343 mm x 305 mm x 76 mm 344 mm x 305 mm x 78 mm 328 mm x 305 mm x 95 mm 381 mm x 298 mm x 83 mm 295 mm x 254 mm x 83 mm 349 mm x 298 mm x 98 mm (13-1/2" x 12" x 3") (13-9/16" x 12" x 3-1/16") (12-29/32" x 12" x 3-3/4") (15" x 11-3/4" x 3-9/32") (11-5/8" x 10" x 3-9/32") (13-3/4" x 11-3/4" x 3-27/32") Air consumption at 6.9 bar (7 kgf/cm2 ,100 psi) Nail capacity 1.2 ltr/cycle (.042 ft3/cycle) 100 nails 1.3 ltr/cycle (.046 ft3/cycle) 100 nails 1.1 ltr/cycle (.039 ft3/cycle) 100 nails 1.2 ltr/cycle (.042 ft3/cycle) 100 nails 1.0 ltr/cycle (.035 ft3/cycle) 110 nails Magazine type Rear loading type Angle: 34û Rear loading type Angle: 34û Rear loading type Angle: 25û Rear loading type Angle: 34û Rear loading type Angle: 34û Blow nozzle Provided None None None None Nailing operation switching device Provided None None None None Direction change of exhaust air Easily changeable 360û by turning by hand Easily changeable 360û by turning by hand None Easily changeable 360û Easily changeable 360û by turning by hand by turning by hand Jam-release Single-touch operation by hand Single-touch operation Single-touch operation Single-touch operation Single-touch operation by hand by hand by hand by hand Driving depth adjustment mechanism Horizontal dial Horizontal dial Horizontal dial Horizontal dial Vertical slide --- 6 --- Handle grip Collating angle Applicable nails Dia. Length Rubber 34û 2.4 mm to 3.0 mm (.095" to .12") 32 mm to 65 mm (1-1/4" to 2-1/2") Rubber 34û 2.4 mm to 3.0 mm (.095" to .12") 25 mm to 65 mm (1" to 2-1/2") Rubber 25û 2.4 mm to 3.0 mm (.095" to .12") 25 mm to 65 mm (1" to 2-1/2") Rubber 34û 2.4 mm to 3.0 mm (.095" to .12") 32 mm to 65 mm (1-1/4" to 2-1/2") Rubber 34û 2.4 mm to 3.0 mm (.095" to .12") 32 mm to 65 mm (1-1/4" to 2-1/2")