Honeywell HJK7000 User Guide - Page 37
Step 3: Con Address, Step 4: Con the Controller for VideoBloX Mode
View all Honeywell HJK7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
UltraKey Plus Controller Installation and User Guide Step 3: Configure Address To configure the keyboard address: 1. Press Quit to exit from the Port Settings menu. 2. Press Keyboard Address to select an address between 1 and 32 to assign to the controller. You can also use the numeric keypad to enter a number between 1 and 32. However, if you enter a number greater than 32, this operation is invalid. 3. Press Enter to save the address and exit the configuration menu. Step 4: Configure the Controller for VideoBloX Mode To configure the controller for VideoBloX mode: 1. Press Users Menu to display the configuration screen. 2. Refer to User Menus on page 62 to configure the device. 3. Press Home and then Quit to exit when the configuration is finished. (Optional) Configuring UltraKey Plus Using the Web Browser Logging onto the Web Browser 1. If not already done, navigate to, or copy and paste, the applicable IP address into your web browser: • LAN connections: for example, the default IP is http://192.168.1.9. • Crossover cable connections - static address: http://192.168.1.9. 2. In the User Name field enter Administrator (case sensitive). 3. In the Password field enter 1234 (default). 4. Click Login. Document 800-02573 Rev B 37 11/2009