Honeywell HJK7000 User Guide - Page 51
Step 2: Con MAXPRO Network Settings, MAXPRO Configuration, Keyboard ID Setting
View all Honeywell HJK7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
UltraKey Plus Controller Installation and User Guide Figure 3-10 System Configuration Tab Step 2: Configure MAXPRO Network Settings To configure MAXPRO network settings: 1. From the side menu, click MAXPRO Configuration. See Figure 3-11. 2. Under Keyboard ID Setting, enter a number between 1 and 99 to set the controller ID. 3. Under MAXPRO Device Network Setting, enter the IP address and Port Number of the MAXPRO-Net Video Matrix system. 4. Click Apply to save the configuration, Cancel to exit without saving, or Default to restore all factory default values. Document 800-02573 Rev B 51 11/2009
UltraKey Plus Controller Installation and User Guide
Document 800-02573 Rev B
51
11/2009
Figure 3-10
System Configuration Tab
Step 2: Configure MAXPRO Network Settings
To configure MAXPRO network settings:
1.
From the side menu, click
MAXPRO Configuration
. See
Figure 3-11
.
2.
Under
Keyboard ID Setting
, enter a number between 1 and 99 to set the
controller ID.
3.
Under
MAXPRO Device Network Setting,
enter the
IP address
and
Port Number
of
the MAXPRO-Net Video Matrix system.
4.
Click
Apply
to save the configuration,
Cancel
to exit without saving, or
Default
to
restore all factory default values.