Husqvarna AUTOMOWER 535 AWD Owner Manual - Page 18

Drive Past Wire, Drive, Past Wire on To make an island on in. wide

Get Husqvarna AUTOMOWER 535 AWD PDF manuals and user guides View all Husqvarna AUTOMOWER 535 AWD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

> 5 cm / 2" Note: Make a blueprint of the work area before you install the boundary wire and guide wire. 35 cm /14" • Put the boundary wire 30 cm / 12 in. (C) from an obstacle that is 1-5 cm / 0.4-2 in. high. E D F 30 cm / 12" 1-5 cm / 0.4 - 2" C • Put the boundary wire 10 cm / 4 in. (D) from an obstacle that is less than 1 cm / 0.4 in. A B • Put the boundary wire around all of the work area (A). Adapt the distance between the boundary wire and obstacles. • Put the boundary wire 35 cm / 14 in. (B) from an obstacle that is more than 5 cm / 2 in. high. 10 cm / 4" max 1 cm / 0.4" • If you have a paving stone path that is in level with the lawn, put the boundary wire below the paving stone. Note: If the paving stone is minimum 30 cm / 12 in. wide, use the factory setting for the Drive Past Wire function to cut all the grass adjacent to the paving stone. Refer to Drive Past Wire on page 29. • If you make an island, put the boundary wire that runs to and from the island near together (E). Put the wires in the same stake. Refer to To make an island on page 19. 18 - Installation 1427 - 002 - 20.12.2019

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Note:
Make a blueprint of the work area before
you install the boundary wire and guide wire.
D
E
B
C
F
A
•
Put the boundary wire around all of the work
area (A). Adapt the distance between the
boundary wire and obstacles.
•
Put the boundary wire 35 cm / 14 in. (B)
from an obstacle that is more than 5 cm / 2
in. high.
35 cm /14
"
> 5 cm / 2
"
•
Put the boundary wire 30 cm / 12 in. (C)
from an obstacle that is 1-5 cm / 0.4-2 in.
high.
1-5 cm / 0.4 - 2
"
30 cm / 12
"
•
Put the boundary wire 10 cm / 4 in. (D) from
an obstacle that is less than 1 cm / 0.4 in.
10 cm / 4
"
max 1 cm / 0.4
"
•
If you have a paving stone path that is in
level with the lawn, put the boundary wire
below the paving stone.
Note:
If the paving stone is minimum 30 cm /
12 in. wide, use the factory setting for the
Drive Past Wire
function to cut all the grass
adjacent to the paving stone. Refer to
Drive
Past Wire on page 29
.
•
If you make an island, put the boundary wire
that runs to and from the island near
together (E). Put the wires in the same
stake. Refer to
To make an island on page
19
.
18
- Installation
1427 - 002 - 20.12.2019