Husqvarna AUTOMOWER 535 AWD Owner Manual - Page 25
After the installation of the product, To do a visual check of the charging station
View all Husqvarna AUTOMOWER 535 AWD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3.9 After the installation of the product 3.9.1 To do a visual check of the charging station 1. Make sure that the indicator LED lamp on the charging station has a green light. 2. If the indicator LED lamp does not have a green light, do a check of the installation. Refer to Indicator lamp in the charging station on page 49 and To install the charging station on page 22. 3.10 Automower® Connect The product has Automower® Connect included from factory. The app gives 2 modes of connectivity: Longrange cellular connectivity and Short-range Bluetooth® connectivity. The product can connect to mobile devices that have the Automower® Connect app installed. Automower® Connect is a free app for your mobile device. The Automower® Connect app gives extended functions to your Husqvarna product. You can: • See the status of your product. • Change settings to your product. • Get extended product information. • Get an alarm if the product moves out of the work area. • See statistics of your product. Note: All countries do not support Automower® Connect because of regional specified cellular systems. The included Automower® Connect lifetime service only applies if there is a third part sub-supplier of 2G/3G/4G available in the operational area. 3.10.1 To install the Automower® Connect app 1. Download the Automower® Connect app on your mobile device. 2. Sign up for a Husqvarna account in the Automower® Connect app. 3. Log in to your Husqvarna account in the Automower® Connect app. 3.10.2 To pair Automower® Connect and the product 1. Do step 1-6 in To start the product for the first time on page 26. 2. Obey the instructions in the Automower® Connect app. 3.10.3 My mowers When you choose My mowers you can manage all the products paired to your account, as well as add new ones. If there are several paired products it is possible to select one of them as Current mower. To pair a new product to the Automower® Connect app: 1. Select the plus sign (+). 2. Select model. 3. Obey the instructions in the Automower® Connect app to finish the pairing. 3.10.4 Firmware over the air (FOTA) The product has a function that automatically downloads new firmware. When a new firmware is available, a notification shows in the app where you can select to install the new firmware. In the factory setting this function is enabled. 3.10.4.1 To set the Firmware over the air (FOTA) 1. Select My Mowers. 2. Select Mower information for the current mower. 3. Select on/off to enable or disable the function. 3.10.5 Automower® Direct Automower® Direct uses short-range Bluetooth® communication, and is included in Automower® 535 AWD. Husqvarna cannot guarantee the time period or coverage of the long-range cellular connectivity. It is possible to communicate with the product through Bluetooth® if you are in short-range of the product. You can use Automower® Direct without a Husqvarna account as long as you have the product PIN code. 1427 - 002 - 20.12.2019 Installation - 25