Husqvarna AUTOMOWER 535 AWD Owner Manual - Page 33
Park for a selected number of hours, To stop the product, To charge the battery
![]() |
View all Husqvarna AUTOMOWER 535 AWD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4.2.3.2 Park for a selected number of hours The product goes to the charging station where it stays for a selected number of hours, then it automatically goes to the usual operation that is set in the Schedule settings. This operation selection is applicable when it is necessary to pause operation, for example for temporary irrigation or work on the lawn. 4.3 To stop the product 1. Push the STOP button on top of the product. Note: If the LED status indicator is lit or is flashing in any color the product is not switched off. Refer to LED status indicator on page 10. Note: The product cannot be switched off when it stands in the charging station. WARNING: The product must be switched off before any maintenance is done, or if the product must be moved from the work area. The product stops and the blade motor stops. 4.4 To switch off the product 1. Push the STOP button to stop the product. 4.5 To charge the battery When the product is new or has been in storage for a long period, the battery can be empty, charge the battery before you start the product. In the Main area mode, the product automatically changes between mowing and charging. WARNING: Only charge the product with a charging station and a power supply which the product is intended for. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. In the event of leakage of electrolyte, flush with water and seek medical help if it comes in contact with the eyes and etc. 2. Push the ON/OFF button for 3 seconds to switch off the product. 3. Make sure that the LED status indicator is not lit. 1. Put the product in the charging station. 2. Put the product in as far as possible and make sure it is connected to the charging station. The battery status can be monitored on the status bar of the display. Note: If the battery is empty the product needs to charge for a longer time period before the product is possible to start. 4.6 To adjust the cutting height with Automower® Connect The cutting height can be varied from MIN (3 cm / 1.2 in.) to MAX (7 cm / 2.8 in.). 1427 - 002 - 20.12.2019 Operation - 33
![](/manual_guide/products/husqvarna-automower-535-awd-owner-manual-5c8bbf6/33.png)