Husqvarna XciteZ380 Owner Manual - Page 13
Safety instructions for maintenance, Operation, Introduction, Husqvarna Connect, WARNING
View all Husqvarna XciteZ380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
• Use protective glasses when you are near batteries. • Do not wear watches, jewelry or other metal objects near the battery. • Keep the battery out of reach for children. • Charge the battery in a space with good airflow. • Keep flammable materials at a minimum clearance of 1 m when you charge the battery. • Discard replaced batteries. See Disposal on page 30. • Explosive gases can come from the battery. Do not smoke near the battery. Keep the battery away from open flames and sparks. Safety instructions for maintenance WARNING: Read the warning instructions that follow before you use the product. WARNING: The product is heavy and can cause injury or damage to property or the adjacent area. Do not do maintenance on the engine or the cutting deck without these conditions: • The engine is off. • The product is parked on a level surface. • The parking brake is applied. • The ignition key in stop position and removed. • The blades are disengaged. • All moving parts have stopped. • The ignition cables are removed from the spark plugs. WARNING: Fluid escaping under pressure may have sufficient force to penetrate skin and cause serious injury. If fluid is injected into the skin, seek immediate medical attention. Keep body and hands away from pin holes or nozzles that eject fluid under high pressure. If a leak occurs, have the product immediately serviced by a trained technician. WARNING: The exhaust fumes from the engine contain carbon monoxide, an odorless, poisonous and very dangerous gas. Do not run the product in closed spaces or spaces with no sufficient air flow. • Keep the product in good working order. Replace worn or damaged parts. Use caution when servicing blades. Wrap the blade(s) or wear gloves. Replace damaged blades. Do not repair or alter blade(s). If equipped, disconnect spark plug wire(s) and the negative battery cable before making any repairs. For best performance and safety, do maintenance on the product regularly as given in the maintenance schedule. Refer to Maintenance schedule on page 18. • Electrical shocks can cause injuries. Do not touch the cables when the engine is on. Do not do a function test on the ignition system with your fingers. • Let the product become cool before you do maintenance near the engine. • The blades are sharp and can cause cuts. Wind protection around the blades or use protective gloves when you do work on the blades. • Do not turn the engine over if the spark plug or ignition cable is removed. • Make sure that all nuts and bolts are tightened correctly and that the equipment is in good condition. • Do not change the adjustment of governors. If the engine speed is too high, the product components can become damaged. Refer to Technical data on page 31 for highest permitted engine speed. • The product is approved only with the equipment supplied or recommended by the manufacturer. Operation Introduction WARNING: Before you operate the product, you must read and understand the safety chapter. • Extended product information. • Information about, and help with, product parts and servicing. Husqvarna Connect Husqvarna Connect is a free app for your mobile device. The Husqvarna Connect app gives extended functions for your Husqvarna product. 1922 - 002 - 03.11.2022 13