Husqvarna XciteZ380 Owner Manual - Page 20
Servicing interval, To reset the servicing timer
View all Husqvarna XciteZ380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Maintenance Replace the foam pre-filter (if equipped).4 Clean the paper filter cartridge.5 Examine the muffler and spark arrester screen. Start the engine and blades and listen for unusual sounds. Sharpen the blades.6 Replace the blades. Replace the spark plugs. Replace the engine oil.7 Replace the engine oil filter. Replace the fuel filter. Replace the paper air filter.8 Daily maintenance Before After * Do maintenance at a minimum of 1 time each year O O * X X O O O O O Maintenance interval in hours 25 50 100 300 O O O O * * * X X X X X X X X O O O O O O O O O O O Servicing interval When the product is at a servicing interval, the servicing symbol (A) shows on the display. The servicing symbol stays on the display until the servicing timer is reset. 2. Push the down button on the control panel until the information symbol is selected. A 3. Push the OK button. The display shows the hour meter. To reset the servicing timer 1. Push the OK button on the control panel to open the menu structure. 4 In conditions with dust, cleaning and replacement must be done more frequently. 5 In conditions with dust, cleaning and replacement must be done more frequently. 6 Must be done by approved service agent. 7 Replace the engine oil after the first 8-10 hours of operation. During heavy load or high ambient temperatures, replace the engine oil each 50 hours. 8 In conditions with dust, cleaning and replacement must be done more frequently. 20 1922 - 002 - 03.11.2022