Husqvarna XciteZ380 Owner Manual - Page 28
Caution messages on the display, Problem, Cause, Symbol
View all Husqvarna XciteZ380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Problem The transaxle leaks oil. The cutting result is unsatisfactory. Cause The seals, housing or gaskets are damaged. There is air in the hydraulic system. The tire pressure is different on the right and left sides. Refer to Tire pressure on page 23. The blades are damaged. The suspension of the cutting deck is not level. The blades are blunt. Refer to To examine the blades on page 24. The product is operated at too high forward or rearward speed. Refer to To get a good cutting result on page 18. The grass is long. Refer to Symbols on the product on page 6. There is grass blockage in the cutting deck. Refer to To clean the product on page 21. Caution messages on the display Symbol Name Cause Operator presence control (OPC) indicator The product stops because the operator is not in the seat and the parking brake is not engaged. Slope indicator The product is operated on a slope >10°. Refer to Safety instructions for operation on slopes on page 10. Parking brake indicator Key switch indicator Control lever indicator The parking brake is engaged. The product cannot start if the key switch is in locked position. The product stops if the key switch is moved from unlocked to locked position. The control levers are in the park position. Control lever indicator One of the control levers is not in the neutral position. Control lever indicator The control levers are in the neutral position. 28 1922 - 002 - 03.11.2022