IBM 86626RY Hardware Maintenance Manual - Page 143
Installing the files while installing Windows NT, IBM ServeRAID Device Driver Diskette
![]() |
UPC - 087944501879
View all IBM 86626RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
The background-server components for Windows NT 3.5X and Windows NT 4.0 install automatically when you use the instructions in this chapter to install the ServeRAID device drivers. Installing the files while installing Windows NT: To install the ServeRAID files while installing Windows NT: 1. Use the ServerGuide Diskette Factory to create an IBM ServeRAID Device Driver Diskette. 2. Insert the Windows NT boot diskette into the diskette drive or insert the bootable Windows NT CD into the CD-ROM drive; then, restart the server. 3. When the message Setup is inspecting the computer's hardware configuration... appears, press the F6 key. 4. After loading some files, Windows NT displays a screen that allows you to manually specify an adapter. When this screen appears, press S to specify additional devices. 5. When prompted in the next window, select Other from the list. 6. When prompted to insert the Manufacturer-supplied-hardware support disk, insert the IBM ServeRAID Device Driver Diskette into the diskette drive; then, press Enter. 7. Select IBM ServeRAID Adapter; then, press Enter. A message similar to the following will appear. Setup is loading files (IBM ServeRAID Adapter).... 8. When prompted, press Enter to continue. 9. Use the instructions provided in the Windows NT manual to complete the normal installation process. 10. After you complete the installation, be sure to apply the latest Service Pack. Installing the files after installing Windows NT: To install the ServeRAID files after Installing Windows NT: 1. Use the ServerGuide Diskette Factory to create an IBM ServeRAID Device Driver Diskette. 2. Insert the IBM ServeRAID Device Driver Diskette into the diskette drive. 3. From the Windows NT Start Menu, select Settings; then, select Control Panel. 4. Select SCSI Adapter; then, select the Drivers tab. 5. Select Add; then, select Have Disk. 6. In the Copy manufacturer's files from field, type: a:\nt 7. Select OK; then in the next dialog box, select OK again. 8. When a message appears asking if you want to use the currently installed device driver or if you want to install a new one, select New. 9. When prompted to enter the full path to the IBM ServeRAID files, type: Netfinity 5500 M20 - Type 8662 135
![](/manual_guide/products/ibm-86625ry-hardware-maintenance-manual-7f818c4/143.png)