IBM 86626RY Hardware Maintenance Manual - Page 297
See Power supply, No Beep Symptom
UPC - 087944501879
View all IBM 86626RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
No Beep Symptom No Beeps occur after successfully completing POST (The Power-On Status is disabled.) No ac power (Power supply ac LED is off) No beep and no video System will not power-up (Power supply ac LED is on) FRU/Action 1. Run Configuration/Setup, set the Start Options Power-On Status to enable. 2. Check speaker connection. 3. Speaker 4. System Board 1. Check the power cord 2. Power Supply (If two are installed, swap them to determine if one is defective.) 3. Power Backplane 4. Hot-Swap Power AC Inlet Box 1. See "Undetermined problems" on page 325. 1. See "Power supply LED errors" on page 301. Netfinity 5500 M20 - Type 8662 289
No Beep Symptom
FRU/Action
No Beeps occur after
successfully completing
POST
(The Power-On Status is
disabled.)
1.
Run
Configuration/Setup,
set the Start Options
Power-On Status to
enable.
2.
Check speaker
connection.
3.
Speaker
4.
System Board
No ac power
(Power supply ac LED is
off)
1.
Check the power
cord
2.
Power Supply (If two
are installed, swap
them to determine if
one is defective.)
3.
Power Backplane
4.
Hot-Swap Power AC
Inlet Box
No beep and no video
1.
See “Undetermined
problems” on
page 325.
System will not power-up
(Power supply ac LED is
on)
1.
See “Power supply
LED errors” on
page 301.
Netfinity 5500 M20 - Type 8662
289