IBM 86626RY Hardware Maintenance Manual - Page 60

go to "General checkout" on page 8. 2. If the amber Hard Disk Status LED on one of the hot-swap hard disk drives is on, see "Controls and indicators" on page 181 for more information. - DASD 2 LED on A hot-swap hard disk drive has failed on SCSI RAID channel 2. Actions: 1. Check the error log for additional information. If the error log indicates a temperature problem and the fans are working correctly, go to "General checkout" on page 8. 2. If the amber Hard Disk Status LED on one of the hot-swap hard disk drives is on, see "Controls and indicators" on page 181 for more information. System Error LED on the information LED panel on the front of the server is off. The light path diagnostics have not detected a system error. Netfinity Advanced System Management Processor The following information is about the Netfinity Advanced System Management Processor that is integrated in the Netfinity 5500 M20. It also describes how to access the Netfinity Advanced System Management Processor without Netfinity Manager. Note To use all of the functions of the Netfinity Advanced System Management Processor, you must install the Advanced System Management service for Netfinity Manager. You also will need a user-provided modem attached to serial port A to use the remote functions. Refer to "Serial ports" on page 189 for information about serial port A. The Advanced System Management service gives you the ability to configure and monitor many features of the server's Netfinity Advanced System Management Processor. You can connect to, and directly access and control, the Netfinity Advanced System Management Processor of a remote system. With the Advanced System Management service you can configure Advanced System Management service events (such as POST, loader, and operating system timeouts; and critical temperature and 52 Netfinity Server HMM