IBM 86626RY Hardware Maintenance Manual - Page 31
System information:, Product data, System card data, PCI routing
UPC - 087944501879
View all IBM 86626RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4. After making changes, you can select: Save Settings to save the selected changes. Restore Settings to delete the changes and restore the previous settings. Load Default Settings to cancel the changes and restore the factory settings. 5. To exit from the Configuration/Setup Utility main menu, select Exit Setup. If you made any changes and did not save them with the Save Settings choice, the system prompts you to save or discard the changes when you attempt to exit from the Configuration/Setup Utility main menu. System summary: Select this choice to display configuration information, including the type and speed of the microprocessor and amount of memory. Changes that you make to configuration settings appear on this summary screen. You cannot edit the fields. The System Summary choice appears on the full Configuration/Setup Utility menu and on the limited Configuration/Setup Utility menu. System information: Select this choice to display information about the Netfinity 5500 M20, and to view the IRQ settings for the RAID and Ethernet controllers on the system board, and other PCI adapters that you purchase and install. Changes that you make on other menus might appear on this summary screen. You cannot edit any fields. The System Information choice appears only on the full Configuration/Setup Utility menu. Product data: Select this choice to view system information, such as the machine type and model, the system serial number, the system board identifier, and the revision level or issue date of the flash electronically erasable programmable ROM (EEPROM) for the Netfinity Advanced System Management Processor, diagnostics, and BIOS. System card data: Select this choice to view information for the system board and processor board. PCI routing: Select this choice to view the IRQ settings for PCI adapters and for the Ethernet, SCSI, and other controllers on the system board. See "PCI bus control" on page 30 for information about changing the PCI IRQ settings. Netfinity 5500 M20 - Type 8662 23