IBM 86626RY Hardware Maintenance Manual - Page 57
CPU Wrong Slot LED on, PCI 2 LED
![]() |
UPC - 087944501879
View all IBM 86626RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
1. If the PCI 1 or PCI 2 LED is on, follow the instructions for those LEDs. 2. If the PCI 1 or PCI 2 LED is not on, restart the server. If the problem persists, go to "General checkout" on page 8. Check System Error Log for additional information. - PCI 1 LED on An error occurred on PCI primary bus 0. The adapter in PCI slot 5 or the system board caused the error. Actions: 1. Check the error log for additional information. If the error log indicates a problem with the integrated ServeRAID controller or the Ethernet controller, go to "General checkout" on page 8. 2. If you cannot determine that the adapter is failing from the information in the error log, try to determine if it is failing by removing the adapter from the PCI primary bus 0 (PCI slot 5) and restarting the server. If the problem persists, go to "General checkout" on page 8. - PCI 2 LED on An error occurred on PCI primary bus 1. An adapter in PCI slot 1, 2, 3, or 4 or the system board caused the error. Actions: 1. Check the error log for additional information. 2. If you cannot correct the problem from the information in the error log, try to determine the failing adapter by removing one adapter at a time from PCI primary bus 1 (PCI slots 1-4) and restarting the server after each adapter is removed. If the problem persists, go to "General checkout" on page 8. - CPU Wrong Slot LED on The combination of microprocessors and terminator cards is not valid. Action: Install the microprocessors in the correct order. See Table 13 on page 240. Netfinity 5500 M20 - Type 8662 49
![](/manual_guide/products/ibm-86625ry-hardware-maintenance-manual-7f818c4/57.png)