IBM 86626RY Hardware Maintenance Manual - Page 331
Import Configuration from Drives, Advanced Functions
UPC - 087944501879
View all IBM 86626RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
Recoverable configuration error Explanation: The configuration data stored in NVRAM (Battery-Backup Cache) does not match the configuration data stored in the EEPROM. Action: 1. Press Ctrl+Alt+Del to restart the system. 2. Press CTRL+I during POST to enter the Mini-Configuration program. 3. Select Advanced Functions from the Main Menu; then, select Import Configuration from Drive(s). WARNING: n logical drives are critical; n logical drives are offline. Explanation: One or more hard disk drives have failed. Action: Replace the defunct drives as soon as possible to prevent data loss. The server has an error due to a Blocked Logical Drive. Explanation: One or more logical drives are in a blocked state. A blocked logical drive cannot be accessed. Action: Press F4 to unblock the logical drive, or press F5 to continue without unblocking. Unable to communicate with the controller Explanation: The controller is not responding to commands. Action: Reseat the controller. If the problem persists, replace the ServeRAID controller. Controller Reg. test failed. Test Number: Explanation: The controller or embedded controller failed the register test, where is the register number and is the test number. Action: Reseat the controller. If the problem persists, replace the ServeRAID controller. Controller hardware error Explanation: The controller is not responding to commands. Action: Reseat the controller. If the problem persists, replace the ServeRAID controller. BIOS not loaded no devices found - Installation stopped. Explanation: The BIOS is unable to find any logical drives attached to any ServeRAID controllers. Therefore the ServeRAID BIOS is not loaded. Action: Reconnect the cable(s) attaching the hard drives to the controller and restart the system. If performing a service procedure, reconnect them when told to do so. Controller Ok; Devices not responding check cables or enclosures. Explanation: A SCSI connection problem has been detected. Action: Check all cables and devices attached to the ServeRAID controller. Look for bent or missing pins on all cables and devices. Netfinity 5500 M20 - Type 8662 323