IBM 86626RY Hardware Maintenance Manual - Page 39

Plug and Play: Before you can install Plug and Play adapters, you must configure ISA legacy adapters (if applicable) and assign the resources that are used by these adapters. When you install an ISA legacy adapter, you must allocate the system resources that the adapter will use. Select Plug and Play to view and identify these resources, which include: Memory I/O ports Direct memory access (DMA) Interrupt Note These menus do not display the resources that are required for the system or by Plug and Play devices. Select Plug and Play; then, use the Up Arrow (↑) or Down Arrow (↓) key to highlight the assignment that you want to change. Use the Left Arrow (←) or Right Arrow (→) key to select from the list of available choices. Enter the appropriate values in the Interrupt Resources data fields. These values range from 0 through 15. The Plug and Play choice appears only on the full Configuration/Setup Utility main menu. Note For further details about Plug and Play devices, see "Plug and Play technology" on page 164. Error logs: Select Error Logs to choose to view either the POST error log or the System Error Log. POST error log: Select POST Error Log to view the three most recent errors detected and logged during POST. You can clear the Post error log from this screen by selecting Clear error logs. System error log: Select System Error Log to view the System Error Log. The System Error Log contains all of the error and warning messages generated during POST and all system status messages from the Netfinity Advanced System Management Processor. The most recent error is displayed first. Use the Up Arrow (↑) and Down Arrow (↓) keys to move through the System Error Log. You can clear the System Error Log by selecting Clear error logs. Netfinity 5500 M20 - Type 8662 31