IBM 86626RY Hardware Maintenance Manual - Page 62
Log in to the Netfinity Advanced System Management
UPC - 087944501879
View all IBM 86626RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
in the terminal program window as the remote system completes POST. While you are monitoring POST on the remote system, all local (terminal program) keystrokes are relayed automatically to the remote system, enabling you to use POST utilities (such as system configuration, RAID Mini-Configuration program, and diagnostic programs) that can be accessed during POST. To use a terminal program to establish a connection with the Netfinity Advanced System Management Processor: 1. Use a terminal program to establish a connection with the Netfinity Advanced System Management Processor modem. The modem settings you should use are: Baud 57.6 k Data Bits 8 Parity None Stop Bits 1 Flow Control Hardware 2. Log in to the Netfinity Advanced System Management Processor. When you have established a connection with the Netfinity Advanced System Management Processor, you will be prompted for a username and password. You must provide a username and password combination that has been previously configured for use with the Netfinity Advanced System Management Processor. You can use one of two username and password combinations: The default username (USERID) and password (PASSW0RD) Note The default username and password is case sensitive. You must use all caps, and the "0" in PASSW0RD is the numeral zero. A username and password that you define using the Advanced System Management service and Netfinity Manager Important If you update the Netfinity Advanced System Management Processor microcode, the default username (USERID) and password (PASSW0RD) are reset. If applicable, notify the system administrator. When you have logged into the Netfinity Advanced System Management Processor, the following main menu appears: 54 Netfinity Server HMM