IBM 86626RY Hardware Maintenance Manual - Page 213
Information LED panel, SCSI Hard Disk Drive Activity Light
UPC - 087944501879
View all IBM 86626RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Information LED panel The information LED panel on the front of the server contains the following status lights. OK 100 LINK TX MB OK RX 1 System Power Light: When this green light is on, system power is present in the server. When this light flashes, the server is in standby mode (the system power supply is turned off and ac current is present). When this light is off, either a power supply, ac power, or a light has failed. Attention If this light is off, it does not mean there is no electrical current present in the server. The light might be burned out. To remove all electrical current from the server, you must unplug the server power cords from the electrical outlets. 2 System POST Complete Light: This green light is on when the power-on self-test (POST) completes without any errors. 3 SCSI Hard Disk Drive Activity Light: This green light is on when there is activity on a hard disk drive. 4 Processor Activity Lights: These green lights indicate activity on each of the installed microprocessors. 5 System Error Light: This amber light is on when a system error occurs. A light on the diagnostics LED panel will also be on to further isolate the error. (For more information, see "Status LEDs" on page 63.) 6 Ethernet Transmit/Receive Activity Light: When this green light is on, there is transmit or receive activity to or from the server. Netfinity 5500 M20 - Type 8662 205