IBM 8668 Hardware Maintenance Manual - Page 119
Diagnostic error codes, do
![]() |
UPC - 087944723158
View all IBM 8668 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Diagnostic Panel LED TEMP LED on FAN LED on FRU/Action 1. Ambient temperature must be within normal operating specifications. See"Features and specifications" on page 3. 2. Ensure fans are operating correctly. 3. Examine System Error Log. a. System over recommended temperature 1) Information LED Panel b. DASD over recommended temperature (DASD LED also on) 1) Overheating hard drive 2) DASD Backplane c. System over recommended temperature for CPU X (where X is CPU 1, 2) (CPU LED also on) 1) CPU X 2) System Board d. I/O Legacy Board over recommended temperature 4. If the CPU LED on the diagnostics panel is also on, one of the microprocessors has caused the error. 1. Check individual fan LEDs. 2. Replace respective fan. 3. Fan Cable. 4. System Board. 5. Power Backplane Board. Diagnostic error codes Note: In the following error codes, if XXX is 000, 195, or 197, do not replace a FRU. The description for these error codes are: 000 The test passed. 195 The Esc key was pressed to abort the test. 197 This is a warning error and may not indicate a hardware failure. For all error codes, replace/follow the FRU/Action indicated. Error Code/Symptom FRU/Action 001-XXX-000 (Failed core tests) 1. System Board 001-XXX-001 (Failed core tests) 1. System Board 001-250-000 (Failed System Board ECC) 1. System Board 005-XXX-000 (Failed Video test) 1. System Board 011-XXX-000 (Failed COM1 Serial Port test) 1. System Board 011-XXX-001 (Failed COM2 Serial Port test) 1. System Board 014-XXX-000 (Failed Parallel Port test) 1. System Board 015-XXX-001 (Failed USB test) 1. System Board Symptom-to-FRU index 111
![](/manual_guide/products/ibm-8668-hardware-maintenance-manual-0575a1a/119.png)