IBM 8863 Service Guide - Page 134
information, Operator, panel, assembly
UPC - 000435474667
View all IBM 8863 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Tier 2 CRU information You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service that is designated for your server. Operator information panel assembly To remove the operator information panel assembly, complete the following steps. Retention clips Release button Release lever Retention clip 1. Read the safety information that begins on page vii, and "Handling static-sensitive devices" on page 100. 2. Turn off the server and peripheral devices, and disconnect the power cords and all external cables necessary to replace the device. 3. Remove the top cover and bezel (see "Removing the cover and bezel" on page 101). 4. Note where the light path diagnostics ribbon cable and front USB cable are connected, and then disconnect both cables from the I/O board. 5. Press the blue release button above the front-panel assembly and pull the assembly out of the server approximately one inch (25 mm). 6. Press the blue release lever on the operator information panel assembly to the left and gently pull the information panel assembly out of the front-panel assembly until it stops. 7. Press the retention clips on each side of the information panel assembly and continue pulling the information panel assembly out of the front-panel assembly until it stops. 8. Press the retention clip on the right side of the information panel assembly and pull the information panel assembly out of the front-panel assembly. To install an operator information panel assembly, complete the following steps: 1. Guide the light path diagnostics ribbon cable and front USB cable through the front-panel assembly first, and insert the information panel assembly into the front-panel assembly until the blue release lever on the front engages. 118 IBM xSeries 366 Type 8863: Problem Determination and Service Guide