IBM 8863 Service Guide - Page 98
IBM 8863 - eServer xSeries 366 Manual
UPC - 000435474667
View all IBM 8863 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 3, "Parts listing, Type 8863," on page 93 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)", that step must be performed only by a trained service technician. System-error log message Action Fan X not detected (X of 1-8) 1. Make sure that nothing is blocking the fan or power supply. 2. Check the physical connection and make sure that the fan is correctly seated. 3. Replace fan X. Front Panel is not plugged in 1. Make sure that the operator information panel cables are correctly connected (verify LED activity). 2. Replace the operator information panel. Hard Drive X Fault 1. Run diagnostics. 2. Hard disk drive 3. SAS backplane Hard drive X removal detected Reseat hard disk drive X and restart the server. Hostname set to by user Information only Hot plug card is not plugged in 1. Make sure that the PCI or PCI-X cables are correctly connected. 2. Reseat the failing hot-plug cable or adapter. 3. Replace the failing hot-plug cable or adapter. Hurricane SMI 1.2V Power Good Fault 1. Reseat the microprocessor tray. 2. Reseat the memory cards. 3. (Trained service technician only) Replace the microprocessor tray. Hurricane Vtt MR 1.5V Power Good Fault 1. Reseat the microprocessor tray. 2. Reseat the memory cards. 3. (Trained service technician only) Replace the microprocessor tray. Hvtt IB 1.8V Power Good Fault 1. Reseat the microprocessor tray. 2. Reseat the memory cards. 3. (Trained service technician only) Replace the microprocessor tray. Hvtr IB 2.5V Power Good Fault 1. Reseat the microprocessor tray. 2. Reseat the memory cards. 3. (Trained service technician only) Replace the microprocessor tray. I/O Card Power Good Fault 1. Reseat the Remote Supervisor Adapter II SlimLine, if present. 2. Reseat the I/O board. 3. Replace the I/O board. 4. (Trained service technician only) Replace the PCI-X board. 82 IBM xSeries 366 Type 8863: Problem Determination and Service Guide